Category Archives: MITUTOYO
MITUTOYO TOOLS
333333333
2222222
Mitutoyo Surftest SJ-210 Portable Surface Roughness Tester, 4 mN
Mitutoyo Surftest SJ-210 Portable Surface Roughness Tester, 4 mN,
Model: SJ-210 | Order No: 178-561-12A,Offers surface roughness measurement in both X and Y-axes, this user-friendly surface roughness tester features a measuring force of 4 mN and can be brought with you anywhere. Allows users to view surface roughness waveforms on the built-in LCD and can perform measurements in any orientation, including vertical and upside-down.,
,
Mitutoyo SJ-210 Offers
Highly versatile and delivers accurate measurements at high speeds, this surface roughness tester is full of features and capabilities that enhance productivity.
Features
- Built-in 2.4″ color graphic, back-lit LCD provides excellent readability, improved visibility and is easy-to-use in dark environments
- The operation keys on the front of the unit and under the sliding cover are well-labeled and easy to use
- Internal memory stores up to 10 measurement conditions and one measured profile
- Password protection prevents unintended operations and protects instrument settings
- The display interface supports 16 interchangeable languages
- LCD display mode can be freely switched between portrait and landscape as well as left-hand or right-hand direction
- High-speed USB communication: Data can be transferred to and from a computer via the high-speed USB interface
- Memory card support: The memory card slot lets you store large amounts of data onto a memory card
- Drive unit can be separated from the display unit by using a cable, allowing more flexible measurement, and can be separated and reattached in one simple step
- The user-friendly screen layout and arrow keys provide intuitive operability
- Displayed settings can be changed easily by using the left and right arrow keys
- Infrequently used keys are hidden under the sliding cover to prevent unintended operations
- Complies with the following standards: JIS (JIS-B0601-2001, JIS-B0601-1994, JIS B0601-1982), VDA, ISO-1997, and ANSI
Extensive display features that assist measurement
- The highly visible 2.4″ color graphic LCD with backlight lets you view the screen easily even in dark environments
- Pass/fail results are displayed in color
- Assessed profiles, load curves, and amplitude distribution curves can be displayed in addition to calculation results
- Assessed profiles can also be zoomed up and down
- The display mode can be easily switched between portrait and landscape
- Calculation results are displayed in large characters
Advanced data storage capabilities
Up to 10 measurement conditions can be stored in the internal memory. Conditions can be quickly read according to the workpiece.
Stylus alarm function
An alarm warns you when the cumulative measurement distance exceeds a preset limit. This feature can be used to prevent problems that would be caused by worn out styli. Any value can be specified as the limit.
Easy setting
Displayed settings can be easily changed by pressing the left and right arrow keys under the sliding cover. For example, these keys can be used to switch the cut-off value (λc) and the number of sampling lengths (N) on the measurement screen.
Setting parameters and recalculating results
The required parameters can be selected from the screen. The sub-menu also lets you specify detailed settings such as the tolerance. After completing measurement, the parameters can be changed and calculation can be executed again using the new parameters.
Applications
- Aerospace
- Automotive
- Defense
- Energy
- General manufacturing
- Medical
Mitutoyo SJ-210 Specifications
Measuring Range | X axis: 0.63″ (16 mm)
Z axis (detector) |
Measuring Speed | When measuring: 0.01, 0.02, 0.03 in/s (0.25, 0.5, 0.75 mm/s) When returning: 04 in/s (1 mm/s) |
Measuring Force/Stylus tip | 4 mN/5 μmR 90° |
Skid Force | Less than 400 mN |
Applicable Standards | JIS ’82/JIS ’94/JIS ’01/ISO ’97/ANSI/VDA |
Assessed Profiles | Primary profile, roughness profile, DF profile, roughness profile-Motif |
Parameters | Ra, Rc, Ry, Rz, Rq, Rt, Rmax, Rp, Rv, R3z, Rsk, Rku, Rc, RPc, Rsm, Rz1max, S, HSC, RzJIS, Rppi, RΔa, RΔq, Rlr, Rmr, Rmr(c), Rδc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Vo, Rpm, tp, Htp, R, Rx, AR, Possible Customize |
Graph Analysis | Bearing area curve/Amplitude distribution curve |
Filters | Gaussian, 2CR75, PC75 |
Cut Off Length | λc: 0.003, 0.01, 0.03, 0.1″ (0.08, 0.25, 0.8, 2.5 mm) λs: 100, 300 µin (2.5, 8 µm) |
Sampling Length | 0.003, 0.01, 0.03, 0.1″ (0.08, 0.25, 0.8, 2.5 mm) |
Number of Sampling Lengths | x1, x2, x3, x4, x5, x6, x7, x8, x9, x10 Arbitrary 0.01 to 0.63″ (0.0001″ interval) [(0.3 to 16 mm: 0.01 mm interval)] |
LCD | 1.45 x 1.93″ (36.7 x 48.9 mm) |
Display Languages | Japanese, English, German, French, Italian, Spanish, Portuguese, Korean, Traditional Chinese, Simplified Chinese, Czech, Polish, Hungarian, Turkish, Swedish, Dutch |
Measurement Result Display | Vertical: 1-parameter display/3-parameter display/Trace display Horizontal: 1-parameter display/4-parameter display/Trace display (invertible) |
External I/O | USB I/F, Digimatic Output, Printer Output, RS-232C I/F, Foot SW I/F |
Functions | Customization: Desired parameters can be selected for calculation and display GO/NG judgment: By maximum value/16 %/Standard deviation Storage of measurement condition: Save the conditions at power OFF Storage: Internal memory: Measurement condition (10 sets) Calibration: Auto-calibration with the entry of numerical value/average calibration with multiple measurement (maximum 5 times) is available |
Power-saving Function | Auto-sleep off function (10 to 600 seconds) |
Power Supply | Two-way power supply: battery (rechargeable Ni-MH battery) and AC adapter Charging time: about 4 hours (may vary due to ambient temperature) Endurance: about 1000 measurements (differs slightly due to use conditions/environment) |
Dimensions | Disply unit: 2.05 x 2.6 x 6.3″ (52.1 x 65.8 x 160 mm), sliding cover closed, detector not mounted Drive unit: 4.5 x .9 x 1.02″ (115 x 23 x 26 mm), detector not mounted |
Weight | About 1.1 lbs (500 g) |
What’s included with the Mitutoyo SJ-210
- Surface Roughness Tester
- Connecting Cable
- Roughness Specimen Ra (3 μm)
- Calibration Stage
- Protective Sheets for Display
- Carrying Case
- AC Adapter
- Operation Manual
- Quick Reference Manual
- Warranty
Click on a category to view a selection of compatible accessories with the Mitutoyo Surftest SJ-210 Portable Surface Roughness Tester, 4 mN.
996139
Replacement stylus for the 178 roughness tester.
12AAL067
Connection cable for the Mitutoyo Sj-210 Printer.
12AAL068
Connection cable for the Mitutoyo Sj-210 Printer.
12AAL069-L
Memory card for Sj-210 Printer.
12BAK730
Replacement power cord set for the SJ-210 Surface Roughness Tester.
Ask a question about Mitutoyo Surftest SJ-210 Portable Surface Roughness Tester, 4 mN
var disqus_shortname=”itm-instruments”;
Please enable JavaScript to view the
var disqusLocation=”;$(document).ready(function(e){$(‘a[href*=”tabask”]’).click(function(){disqusLocation=’ask’;displayDisqus(‘desktop’);});$(‘a[href*=”collapseask1″]’).click(function(){disqusLocation=’ask’;displayDisqus(‘mobile’);});});$(window).resize(function(){displayDisqus(‘resize’);});
Customer Reviews for the Mitutoyo SJ-210
var sa_products_count=3;var sa_date_format=’F j, Y’;var sa_product=’87274′;(function(w,d,t,f,o,s,a){o=’shopperapproved’;if(!w[o]){w[o]=function(){(w[o].arg=w[o].arg||[]).push(arguments)};s=d.createElement(t),a=d.getElementsByTagName(t)[0];s.async=1;s.src=f;a.parentNode.insertBefore(s,a)}})(window,document,’script’,’//www.shopperapproved.com/product/27834/’+sa_product+’.js’);
Mitutoyo MyCAL Digital Caliper, Range: 0-12″ – 500-193
Mitutoyo MyCAL Digital Caliper, Range: 0-12″ – 500-193,
Mitutoyo MyCAL Digital Caliper – 500-193
ABSOLUTE Digimatic Caliper Series 500, Range: 0 – 12″
– with Exclusive ABSOLUTE Encode Technology
Features:
- Large and clear LCD readout.
- The ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurements. This switch will also allow return to the absolute (ABS) coordinate and display of the true position from the origin point (usually jaws-closed point).
- Data Hold Unit (959143) is optional.
- Carbide-tipped jaw type calipers are also available.
- With thumb roller. Except 500-500-10, 500-501-10,500-502-10.
- Supplied in fitted plastic case.Except 1000mm / 40” supplied in wooden case.
Technical Data:
- Accuracy: Refer to the list of specifications
- Resolution: 0.01mm or .0005″/0.01mm
- Repeatability: 0.01mm / .0005”
- Display: LCD
- Length standard: ABSOLUTE electrostatic capacitance type
- linear encoder
- Max. response speed: Unlimited
- Battery: SR44 (1 pc.), 938882
- Battery life: Approx. 3.5 years under normal use
Function:
- Origin-set, Zero-setting, Data output, inch/mm conversion (inch/mm models ONLY)
- Alarm: Low voltage, Counting value composition error
,
Mitutoyo – 547 Series SAE and Metric Digital Absolute Depth Gauge
Mitutoyo – 547 Series SAE and Metric Digital Absolute Depth Gauge,
547 Series SAE and Metric Digital Absolute Depth Gauge by Mitutoyo. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
Specifications:
Measuring Range: 0 to 8″ (0 to 200 mm) |
Type: Digital |
Display: LCD |
Units Of Measuring: SAE and Metric |
Flatness of Base Face: 5 um |
SPC Output: Yes |
Power Supply: SR44 Battery |
Battery Life: Approx. 3.5 years under normal use |
Stroke: 0.5″ |
Extension Rod: 0.5″, 1″, 2″, 4″ |
Features:
- Can keep track of the origin point once set for the entire life of the battery
- Wide probing range is available with the supplied extension rod
- Bottom surface of the base is hardened, ground and lapped for highest decree of flatness
- ABSOLUTE Digimatic Depth Gage can keep track of the origin point once set for the entire life of the battery
- Bottom surface of the base is hardened, ground and lapped for highest degree of flatness
- With SPC data output
- Made in Japan
Includes:
- Digital Depth Gauge
- Plastic Case
Brand: Part Number:
Mitutoyo – 2 Series SAE Dial Standard Type Indicator
Mitutoyo – 2 Series SAE Dial Standard Type Indicator,
2 Series SAE Dial Standard Type Indicator by Mitutoyo. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
Specifications:
Type: Analog |
Dial Diameter: 57 mm |
Units Of Measuring: SAE |
Contact Point Material: Hardened Steel |
Stem Diameter: 3/8″ |
Thread: #4-48 UNF |
Dial Color: White |
Features:
- The revolutionary stem-bush design for trouble free stem clamping and longer clamping range
- No through screw-hole on the frame for high dust-resistance
- Made in Japan
Brand: Part Number:
Mitutoyo – 329 Series SAE and Metric Digital Interchangeable Rod Type Depth Micrometer
Mitutoyo – 329 Series SAE and Metric Digital Interchangeable Rod Type Depth Micrometer,
329 Series SAE and Metric Digital Interchangeable Rod Type Depth Micrometer by Mitutoyo. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
Specifications:
Increments: 0.00005″ (0.001 mm) |
Type: Digital |
Display: LCD |
Units Of Measuring: SAE and Metric |
Accuracy: +/- 3 um |
Contact Point Flatness: 0.00001″ |
Contact Point Flatness: 0.3 um |
Base Flatness: 0.00008″ |
Base Flatness: 2 um |
Parrallelism: [0.00016 + (0.00004 x R/2]” |
Contact Point Material: Hardened Steel |
SPC Output: Yes |
Base Size: 4″ x 0.63″ |
Contact Point Diameter: 4 mm |
Thimble Diameter: 18.3 mm |
Spindle Lock: Yes |
Power Supply: SR44 Battery |
Battery Life : Approx. 1.2 years under normal use |
Features:
- Provides a wide measuring range
- The rod length can be adjusted in 1 In or 25mm increments
- SPC data output
- Ø4mm interchangeable rods, with lapped measuring end, provide a wide measuring range
- The rod length can be adjusted in 25mm or 1in increments
- With ratchet stop for constant force
- With measuring rod clamp
- With SPC output
- With digit counter
- Supplied in fitted plastic case
- Made in Japan
Brand: Part Number:
Mitutoyo – 178 Series Standard Surface Roughness Tester Detector
Mitutoyo – 178 Series Standard Surface Roughness Tester Detector,
178 Series Standard Surface Roughness Tester Detector by Mitutoyo. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
Specifications:
Used For: SJ-210 and SJ-310 Surface Roughness Tester |
Features:
- Skidded measuring
- Made in Japan
- Designed to help you get your job done right
- Provides the ultimate in functionality
- Built to meet your specific measuring needs
- Manufactured utilizing top-grade materials
- Guaranteed to serve reliably for a long time
- Ensures the highest quality at an affordable price
Brand: Part Number:
Mitutoyo – 568 Series SAE and Metric Digital Absolute Borematic Snap Bore Gauge
Mitutoyo – 568 Series SAE and Metric Digital Absolute Borematic Snap Bore Gauge,
568 Series SAE and Metric Digital Absolute Borematic Snap Bore Gauge by Mitutoyo. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
Specifications:
Type: Digital |
Display: LCD |
Units Of Measuring: SAE and Metric |
Power Supply: SR44 Battery |
Battery life: Approx. 7,000 hours |
Features:
- TiN-coated measuring contact points provide excellent durability and impact resistance and allow the instrument to measure to the bottom of a blind hole
- TiN-coated measuring contact points provide excellent durability and impact resistance and allow the instrument to measure right to the bottom of a blind hole
- Large LCD digits of 8.5mm height for error-free reading
- 330-degree rotatable display unit for easy reading at any angle
- GO/NO-GO judgment function
- The ABSOLUTE linear encoder eliminates the fear of over-speed errors
- With SPC data output
- Setting rings for origin point setting are optional
- Can measure deep holes by attaching an optional extension rod
- Measurement can be taken closer to the bottom of a blind bore
- Supplied in fitted wooden case
- Made in Japan
Brand: Part Number: