Category Archives: CEDAR

杉崎CEDAR

CEDAR

Accessories,One Way Joint OW series (025/10/20/60)

Accessories

  • One Way Joint OW series (025/10/20/60)

Measuring joint of electric screwdriver Special structure that does not require rewinding Improve workability by unique structure, and complete measuremtn by only operation in the tightening direction.

Enable to be performed long-time stable Torque manage due to the structure which is not necessary to consider the influence of friction.

  • Enable to measure with bit set
  • Efficient torque check in tightening direction
  • Reaction force absorbing structure
  • Enable to measyre Low-range torque

CEDAR

Torque tester,WDISR-IP series

Torque tester

  • WDISR-IP series

Manual torque tool management / built-in battery type For managing various manual torque drivers and wrenches It works with a personal computer or PLC to manage torque measurement more highly.

For managing manual torque drivers and wrenches.

The “DIS series” has become easier to use and has higher performance.

  • Color display that can display various information.
  • Data output is standard equipment for both USB and RS232C.
  • A series of diverse lineups from up to 500mN・m (0.5N・m) to 1500N・m.
  • Numerical values such as pass / fail conditions can be set up to 10 channels.
  • Pass / fail judgment is clearly displayed in color.
  • Built-in battery drive.
  • The WDISR-IP series includes WDISR-IP05, WDISR-IP5, WDISR-IP50, WDISR-IP200, WDISR-IP500, and WDISR-IP1500.


CEDAR

Torque tester,WDI series

Torque tester

  • WDI series

New standard torque tester 50 years of torque tester manufacturing. WDI-10HR　WDI-100HR　WDI-250

You can manage the electric screwdriver / manual torque driver and wrench.

  • Easy-to-understand color display.
  • 10HR / 100HR is capable of high-resolution measurement with 1/10 the normal resolution.
  • Equipped with data output via USB / RS232C.
  • Clear signals and various commands can be sent from a personal computer or PLC.
  • Measurement joints can be selected according to the management method and tool characteristics.
  • Manual tool measurement jig A screw cube is attached according to the measurement band.
  • A storage case is available as an option.
  • The WDI series includes WDI-100HR, WDI-10HR, and WDI-250.
  • External dimensions–160(W) 143(D) 58(H) mm


CEDAR

Torque tester,WDISR-RL series

Torque tester

  • WDISR-RL series

Separate type digital torque driver The detector is small and lightweight. For managing small torque. Since it is a built-in battery type, it can be used for a wider range of purposes.

It works with a personal computer or PLC to manage torque measurement more highly.

  • A color display that can display various information.
  • Data output is standard equipment for both USB and RS232C.
  • Numerical values such as pass / fail conditions can be set up to 10 channels.
  • The pass / fail judgment is displayed in color for easy understanding.
  • Built-in battery drive.
  • The WDISR-RL series includes WDISR-RL005, WDISR-RL05, WDISR-RL6, and WDISR-RL10.
CEDAR

Torque tester,WDIS-IP series

Torque tester

  • WDIS-IP series

For managing manual torque tools.　Successor to the DIS-IP series. For managing various manual torque drivers and wrenches. n conjunction with a computer or PLC, torque measurement can be managed at a more advanced level.

For managing manual torque drivers and wrenches.

  • Color display that can display various information.
  • Data output is standard equipment for both USB and RS232C.
  • A series of diverse lineups from up to 500mN・m (0.5N・m) to 1500N・m.
  • Numerical values such as pass / fail conditions can be set up to 10 channels.
  • Pass / fail judgment is clearly displayed in color.
  • Powered by direct power from the AC adapter or 4 AA batteries.
  • WDIS-IP series includes WDIS-IP05, WDIS-IP5, WDIS-IP50, WDIS-IP200, WDIS-IP500, and WDIS-IP1500.
CEDAR

Torque tester,WDIS-IPS series

Torque tester

  • WDIS-IPS series

DIS-IPS series successor For managing automatic and semi-automatic tools. For managing various torque tools.

The small detection part fits measurements in various locations.

In conjunction with a computer or PLC, torque measurement can be managed at a more advanced level.

  • A color display that can display various information.
  • Data output is standard equipment for both USB and RS232C.
  • Numerical values such as pass / fail conditions can be set up to 10 channels.
  • The pass / fail judgment is displayed in color for easy understanding.
  • Powered by direct power from the AC adapter or 4 AA batteries.
  • Various commands can be input from PLC or PC.
  • WDIS-IPS series includes WDIS-IPS05C, WDIS-IPS5C, and WDIS-IPS20CL.
CEDAR

Torque tester,WDIS-RL series

Torque tester

  • WDIS-RL series

Separate type digital torque driver The detector is small and lightweight. For managing small torque. It works with a personal computer or PLC to manage torque measurement more highly.

  • A color display that can display various information.
  • Data output is standard equipment for both USB and RS232C.
  • Numerical values such as pass / fail conditions can be set up to 10 channels.
  • The pass / fail judgment is displayed in color for easy understanding.
  • Powered by direct power from the AC adapter or 4 AA batteries.
  • WDIS-RL series includes WDIS-RL005, WDIS-RL05, WDIS-RL6, and WDIS-RL10.
CEDAR

Torque tester,CD-100M/10M

Torque tester

  • CD-100M/10M

Suitable for daily inspection of electric screw driver Using convensional joint (SJ joint (PAT)) Enable to save 5 channels of pass/fail judgement criterion, and enable to change settings by switch channels even if the tightening term changes.

High durability against high torque loaded unexpectedly. (triple the durability of conventional model).

Also, the attached adapter does not disassemble the joint due to excessive rewinding.It can be used and managed in a conventional way.

  • Show “Measurement mode”, “Measurement unit”,”maximum, minimum, average”
  • Switchable measurement unit
  • Enable to save 5 sets of settings such as upper limit and lower limit
  • 800 items of memory data
  • Real-time output About every 1/180 seconds
  • Data acquisition software can be downloaded for free

CEDAR

Torque tester,DI-9M-8/08

Torque tester

  • DI-9M-8/08

Suitable for daily inspection of electric screw driver Using “OW joint” (joint which is unnecessary to rewind) Enable to save 5 channels of pass/fail judgement criterion, and enable to change settings by switch channels even if the tightening term changes.

Due to “OW Joint”, able to mesures effectively without rewinding.

  • Show “Measurement mode”, “Measurement unit”, and “maximum, minimum, average”
  • Switchable measurement unit
  • 800 items of Memory data
  • Real-time output About every 1/180 seconds
  • Data acquisition software can be downloaded for free
  • Include “Screw Cube”-measuring jig for manual tools

CEDAR

Torque tester,NDI-800CN/80CN

Torque tester

  • NDI-800CN/80CN

Suitable for daily inspection of electric screw driver Progress of Visibility, Usability and Connectability The easy-to-read color display, addition of a clock function, and simple operation with dedicated software enable more advanced management.

Efficient measurement without unwinding work by “OW joint”.

  • Easy set-up of tester on PC
  • Easy search of memory data
  • Enable to be powered directly by AC adapter
  • Enable to check pass/fail threshold value during measurement
  • Color display depending on measurement value
  • Software can be downloaded for free
  • Include “Screw Cube”-measuring jig for manual tools