Mitutoyo 543-301 – 543 Series 0 to 0.5″ SAE and Metric Digital Absolute Indicator with Max./Min. Value Holding Function,
543 Series 0 to 0.5″ SAE and Metric Digital Absolute Indicator with Max./Min. Value Holding Function (543-301) by Mitutoyo. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
Specifications:
Measuring Range: 0 to 0.5″ (0 to 12.7 mm) |
Increments: 0.00005″, 0.0001″, 0.0005″ (0.001 mm, 0.01 mm) (Selectable) |
Type: Digital |
Display: LCD |
Units Of Measuring: SAE and Metric |
Accuracy: 0.00010″ (0.003 mm) |
Model: Id-C112Amx(B) |
Back Type: Lug |
Stem Diameter: 8 mm |
Thread: M2.5 x 0.45 |
Types: Iso/Jis |
Ip Rating: Ip42 |
Power Supply: Cr2032 Battery |
Battery Life: Approx. 12 Months Under Normal Use |
Features:
- The new Peak Hold type digimatic indicator features both a Key-lock and a Parameter-lock. This is designed to prevent accidental changing of settings during operation
- An analog bar provides easy to read values when scanning for max, min, and TIR values
- GO/±NG judgment is performed by setting the upper and lower tolerances for max, min, and runout values
- The new Peak Hold-Type Digimatic Indicator features both a Key-Lock and Parameter-Lock to prevent accidental changing of settings during operation
- Parameter setting software makes it even eay to set all available parameters
- An analog bar provides easy-to-read values when scanning for Max, Min and TIR Values
- The maximum, minimum or runout value can be displayed during measurement
- Go/no-go judgment is performed by setting the upper and lower tolerances for max., min. and runout values
- High speed sampling ratio of 50 times/s
- Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle Absolute Position from the origin when turned on
- Made in Japan
Brand: Part Number: 543-301 Alternate MPN: 543301