Mitutoyo 543-402 – 543 Series 0 to 0.5″ SAE and Metric Digital Absolute Standard Type Indicator,
543 Series 0 to 0.5″ SAE and Metric Digital Absolute Standard Type Indicator (543-402) by Mitutoyo. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
Specifications:
| Measuring Range: 0 to 0.5″ (0 to 12.7 mm) |
| Increments: 0.0005″ (0.01 mm) |
| Type: Digital |
| Display: LCD |
| Units Of Measuring: SAE and Metric |
| Accuracy: 0.001″ |
| Contact Point Material: Hardened Steel |
| Ip Rating: Ip42 |
| SPC Output: Yes |
| Measure Force: 0.9N |
| Stem Diameter: 3/8″ |
| Thread: #4-48 UNF |
| Back Type: Lug |
| Model: ID-C1012EX |
| Types: Iso/Jis |
| Power Supply: Sr44 Battery |
| Battery Life: Approx. 5,000 Hours Under Normal Use |
Features:
- Large, easy-to-read LCD
- GO/±NG judgement is performed by setting the upper and lower tolerances for max., min. and runout values
- Internal calculations using the simple formula of [F(x)=Ax)] are available
- Similar in size to Series 2 dial indicators
- As compact as standard Series 2 dial indicators
- GO/±NG judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/±NG) can be displayed in full-size characters
- The positive/negative count resulting from the spindle’s up/down movement can be toggled
- Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle “Absolute Position” from the origin at power-on. Also unlimited response speed eliminates over-speed errors
- The ID-C indicator face can be rotated 330° to an appropriate angle for easy reading
- With SPC data output
- Made in Japan
Brand: Part Number: 543-402 Alternate MPN: 543402