Mitutoyo 543-491B – 543 Series 0 to 2″ SAE and Metric Digital Absolute Standard Type Indicator,
543 Series 0 to 2″ SAE and Metric Digital Absolute Standard Type Indicator (543-491B) by Mitutoyo. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
Specifications:
Measuring Range: 0 to 2″ (0 to 50.8 mm) |
Increments: 0.00005″ (0.001 mm) (Switchable) |
Type: Digital |
Display: LCD |
Units Of Measuring: SAE and Metric |
Accuracy: 0.0002″ |
Contact Point Material: Hardened Steel |
Ip Rating: Ip42 |
SPC Output: Yes |
Measure Force: 2.3N |
Stem Diameter: 8 mm |
Thread: M2.5 x 0.45 |
Back Type: Flat |
Model: ID-C150MXB |
Types: Iso/Jis |
Power Supply: Sr44 Battery |
Battery Life: Approx. 5,000 Hours Under Normal Use |
Features:
- Similar in size to Series 2 dial indicators
- As compact as standard Series 2 dial indicators
- Large, easy-to-read LCD
- GO/±NG judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/±NG) can be displayed in full-size characters
- The positive/negative count resulting from the spindle’s up/down movement can be toggled
- Internal calculations using the simple formula of [F(x)=Ax)] are available
- Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle “Absolute Position” from the origin at power-on. Also unlimited response speed eliminates over-speed errors
- The ID-C indicator face can be rotated 330° to an appropriate angle for easy reading
- With SPC data output
- Made in Japan
Brand: Part Number: 543-491B Alternate MPN: 543491B